Thermoplastic HDPE Joints
HDPE socket type hot melt fittings
HDPE pipe joints with socket fusion welding are produced using injection moulds. The raw material, PE100-grade high-density polyethylene (HDPE), is joined to the HDPE pipe using the socket fusion welding method.
XINYIHONG's socket fusion welding of HDPE pipe joints fully complies with EN 12201 and ISO 4427.
HDPE socket welded 90° elbow
HDPE 90° elbows with socket fusion welding are produced using injection moulds. The raw material, PE100-grade high-density polyethylene (HDPE), is joined to the HDPE pipe using the socket fusion welding method.
XINYIHONG's HDPE 90° elbow socket welded pipes are fully compliant with EN12201 and ISO 4427.
HDPE Socket Tee Equal
HDPE equal tee socket fusion joints are produced using an injection mould and all sides are the same size. The raw material, PE100-grade high-density polyethylene (HDPE), is joined to the HDPE pipe using the socket welding method.
XINYIHONG's HDPE Isobar socket welded pipes are fully compliant with EN12201 and ISO 4427 standards.
HDPE Socket Fusion Reducing Pipe
HDPE Reducing Pipe Socket Fusion Welding is produced using an injection mould. The raw material, PE100-grade high-density polyethylene (HDPE), is joined to the HDPE pipe by socket welding.
XINYIHONG's HDPE Reducing Socket Welded Pipes are fully compliant with EN12201 and ISO 4427.
HDPE Socket Fusion 45° Elbow
HDPE 45° elbows with socket fusion welding are produced using an injection mould and have the same dimensions on both sides. The raw material, PE100-grade high-density polyethylene (HDPE), is joined to the HDPE pipe using the socket welding method.
XINYIHONG's HDPE 45° elbow socket weld fittings are fully compliant with EN12201 and ISO 4427.
HDPE socket fusion end caps
HDPE socket fusion end caps are produced using injection moulding. The raw material, PE100 grade High Density Polyethylene (HDPE), is joined to the HDPE pipe by socket fusion welding.
XINYIHONG's socket fusion bonded HDPE pipe joints fully comply with EN 12201 and ISO 4427 standards.
HDPE Socket Fusion Tee Reduction
HDPE Tee Reducing Socket Fusion Joints are produced using injection moulding. The raw material, PE100-grade high-density polyethylene (HDPE), is joined to the HDPE pipe by socket welding.
XINYIHONG's HDPE Tee Reducing Socket Fusion Joints are fully compliant with EN12201 and ISO 4427 standards.
HDPE Socket Weld Flanges
HDPE short flange socket fusion joints are produced using injection moulds. The raw material, PE100-grade high-density polyethylene (HDPE), is used to join HDPE pipes by means of the socket fusion welding method. xinyihong's socket fusion welding of HDPE short flanges complies fully with the EN 12201 and ISO 4427 standards.
Butt fusion welding is a method of joining plastic pipes, fittings, or other similar forms of thermoplastic resin in which the ends to be joined are heated to a molten state and then quickly pressed together to form a uniform bond.’ For HDPE fittings, you can use a butt fusion splicer to heat the ends of the fittings or pipes and then press them together to form a strong bond/fusion and eliminate all potential leaks and joints.